Now I’m back from the medieval event, and it will be mentioned in a few posts, as I didn’t have time before to blog about all the things I made for it. If you want to see pictures now, you can go to my groups Facebook page.
My one year old could use his brother’s old shoes, though being a wee bit too large, but my three year old needed new ones. I have been to this event before, and know the terrain. Though our usual camp spot is grassy and pleasant, you have to walk on both cobblestones and gravel to reach the bathrooms. Also, there’s no knowing what the weather will be like, not to mention the possible danger of sharp objects. So I had to make him shoes.
His old shoes were boots, which were secure enough to stay put even on small toddler feet, but now he’s old enough not to kick of his shoes by accident. I decided to make him a small version of the Bocksten Bog man’s shoes, dated to the 14th century. It’s a model I’ve made before, so I had an idea about how the pattern pieces should look. Now, I’m decidedly not a shoemaker, so if you are proficient at this, brace yourself. If you have any handy advice, please share. I hope to become a decent shoemaker sometime in future.
First I traced his foot on a piece of paper, and then used that to draw a sole. I drew an upper to. I made a mock-up from them – too small. The second attempt, seen here, worked well, with minor alterations.
And this was the final pattern.
I used leather I had at home, 1 millimetre for the uppers, and 2 millimetres for the soles.
I put a welt between the sole and upper as I sewed, for strength and durability.
I also stitched a piece of leather to support the back of the shoe. Not puncturing the right side of the leather uppers was tricky, but I only messed up once.
Medieval shoes were really sewn on a last, like this one (number 5) for a child’s shoe in Malmö Museer, but I’m not there yet. I’m terrible with woodwork.
I did try one thing to get closer to historical accuracy though: I did not use needles when sewing. In period, the waxed linen thread was twisted round a bristle, but as I don’t have any, I used fishing line instead, as advised by Sofia and Henrik. It took a bit of practice – at first it wouldn’t work at all, but after more advice and practice, it worked quite well, and I can see it working excellently with more practice.
In short, and to my understanding, this is how it works: you take your linen thread, and unravel the ends a bit, and pluck at the ends to make them uneven. You wax the thread, and twist it, with its unravelled ends, round the fishing line, which has been sandpapered for friction. The plucked, uneven ends of the thread makes the transition from thread to line smooth, and will slide through the holes made by the awl easy enough. This makes for smaller holes than a doubled thread and needle would require, and in shoes, this is a good thing.
I believe that to be more accurate, I should have let the holes in the soles be at an angle, from inside to the side of the sole, instead of straight trough from inside to outside, but I decided one new thing was enough for his project, for which I had some time pressure. I’m keen to try to make angled stitches though, they make for a much smoother and more elegant result.
After sewing was finished, I dipped the shoes in water to make them more flexible (of course the shoes were also wet when I stitched them), and then turned them, letting them dry with rolled up pieces of terry cloth in them to keep their shape. I then greased the shoes (which darkened them a lot – rather nice, I think), added laces, and they were ready to go.
They were finished before the deadline of the HSM challenge #6 – Out of Your Comfort Zone.
The Challenge: # 6 – Out of Your Comfort Zone
Fabric: 1 millimetre leather for the uppers, 2 millimetre for the soles.
Pattern: Drafted and draped my own, based on period shoes.
Notions: Linen thread.
How historically accurate is it? OK, I suppose – I don’t think it would stand out too much if sent back in time, though likely seen as the early work of an apprentice. There are a couple of period techniques that I did not use, and of course that affect the result. Still, one point to me for giving up sewing with needles!
Hours to complete: Not sure, possibly about 20.
First worn: At a medieval event last weekend.
Total cost: Not sure how much it would have been if the materials were bought new, but at this time it didn’t cost me anything, as everything was in my stash.
2 thoughts on “14th Century Child’s Shoes”
The wax used to secure thread to boar bristles was black, and sticky. I haven't seen/used any myself, but I've read about it in my leatherworking books. I saw a recipe in a U.S. Cavalry manual that included beeswax and pine tar or pitch, but not the ratios.
I did an experiment comparing the appearance of black linen thread waxed with plain beeswax and natural linen thread using black wax; for that I used encaustic media, which had a similar composition, but not necessarily in the same ratio, but I could buy it pre-made. 🙂 (end result: no significant visual difference on black leather, on light leather I had issues with black smears from the wax rubbing off on my hands and the leather).
When you've used needles, have you used actual harness needles with a small “egg” eye? That helps reduce bulk, as does using the smallest one possible, and fraying out the end of your thread (I pull it across the blade of a hobby knife).
ADORABLE. Simply adorable. Tiny little feet!